Hyundai Equus: Presure Switch Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Presure Switch Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Presure Switch Description and Operation
| Description |
The oil pressure switch detects any abnormal hydraulic pressure to the 35R clutch in the N range.
Middle Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of middle speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...
Presure Switch Specifications
Specifications
Specifications (20°C(68°F))OFF => ON146 ± 40 kPaON => OFF50 kPa
...
See also:
Fuel Pressure Control Valve Troubleshooting
Signal Waveform
...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description and Operation
Description
UD Clutch control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic
pressure inside the UD Clutch. ...
Intake Manifold Repair procedures
Removal and Installation
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Remove the engine room cover (A ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com