Hyundai Equus: Input Speed Sensor Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Input Speed Sensor Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Input Speed Sensor Specifications
| Specifications |
x Type: Hall effect sensor
x Specifications
| Operation condition (°C)°F | ((-)40~150)) -40~302 | |
| Air gap(mm)in. | 1.3(0.0512) | |
| Output voltage | High | 1.4 |
| Low | 0.7 | |
Input Speed Sensor Description and Operation
Description
Input speed sensor is a vital unit that measures the rate of
rotation of the input shaft inside the transmission and delivers the
readings to the TCM. The sensor provides critical ...
Input Speed Sensor Schematic Diagrams
Circuit Diagram
...
See also:
Water pump Repair procedures
Removal and Installation
Water Pump
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Remove the air du ...
Alternator Specifications
Specification
ItemSpecificationRated voltage13.5V , 180ASpeed in use1,000 ~ 18,000rpmVoltage regulatorIC Regulator built in type Regulator reform mode voltage (V) [COM terminal]13.85 ~ 14.85 (-35 ...
Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 7,500
miles (12,000 km) or sooner if irregular wear develops.
During rotation, check the tires for correct balance.
When r ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com