Hyundai Equus: Fuel Pump Control Module (FPCM) Specifications
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Pump Control Module (FPCM) Specifications
| Specification |
| ltem | Specification | |
| Supply Voltage (V) | 8~18 | |
| Supply Current (A) | Max. 10 | |
| Fuel Pressure (kpa) | Starting | 600 |
| Drive | 350 ~ 500 | |
| Stop | 20 Under | |
Fuel Pump Control Module (FPCM) Description and Operation
Description
The fuel pump control module (FPCM) is installed on the right
side of the trunk compartment. It controls the BLDC (Brushless DC)
motor mounted inside the variable low pressure fuel ...
Fuel Pump Control Module (FPCM) Schematic Diagrams
Circuit Diagram
...
See also:
Rear Differential Carrier Components and Components Location
Component
1. Rear differential carrier assembly
Component
1. Pinion lock nut2. Companion flange3. Pinion oil seal4. Pinion front bearing5. Differential case6. Side oil seal7. Drain plug8. ...
Lower Arm Repair procedures
Removal
[Front Lower Arm]
Replacement the lateral arm
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect ...
Purge Control Solenoid Valve (PCSV) Description and Operation
Description
Purge Control Solenoid Valve (PCSV) is installed on the surge
tank and controls the passage between the canister and the intake
manifold. It is a solenoid valve and is open when the ...
Categories
Hyundai Equus Manuals
