>

Hyundai Equus: Fuel Pressure Control Valve Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Fuel Pressure Control Valve Specifications

Specification
Item
Specification
Coil Resistance (x)
0.47 ~ 0.51 [20°C(68°F)]

    Fuel Pressure Control Valve Description and Operation
    Description Fuel Pressure Control Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on vario ...

    Fuel Pressure Control Valve Troubleshooting
    Signal Waveform ...

    See also:

    Front Rear Parking Assist System Switch Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower panel and then push t ...

    TPMS Sensor Description and Operation
    Description 1. General description (1) WU is a sensor placed in the tire that reports pressure and temperature. (2) The WU is mounted inside the wheels, fixed to the valve. The angle between ...

    Oil Pump Components and Components Location
    Components Location 1. Oil seal2. Reaction shaft3. Housing4. Cover5. O-Ring6. Reaction shaft7. Snap ring8. Needle bearing9. 8LR/B return spring10. 8LR/B piston ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com