>

Hyundai Equus: Purge Control Solenoid Valve (PCSV) Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Purge Control Solenoid Valve (PCSV) Specifications

Specification
Item
Specification
Coil Resistance (x)
14.0 ~ 18.0 [20°C(68°F)]

    Purge Control Solenoid Valve (PCSV) Description and Operation
    Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ...

    Purge Control Solenoid Valve (PCSV) Schematic Diagrams
    Circuit Diagram ...

    See also:

    Brake fluid
    Check brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 3 or ...

    Checking the engine oil level
    1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...

    Power Trunk Module Drive Unit Repair procedures
    Removal     • When removing and installing the trunk lid, an assistant is necessary. • Take care not to be closed the trunk when removing the push rod. • Wear ...

    Categories

    Hyundai Equus Manuals

    2011-2026 Copyright www.heqmanual.com