>

Hyundai Equus: Injector Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Injector Specifications

Specification
Item
Specification
Coil Resistance (x)
1.08 ~ 1.23 [23°C(73.4°F)]

    Injector Description and Operation
    Description Based on information from various sensors, the ECM can calculate the fuel amount to be injected. The fuel injector is a solenoid-operated valve and the fuel injection amount is cont ...

    Injector Troubleshooting
    Signal Waveform ...

    See also:

    Assist Handle Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply p ...

    Front Impact Sensor (FIS) Description and Operation
    Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

    Power Steering Hose Repair procedures
    Replacement - Refer to the components illustration during removal or installation. - When installing, be sure to connect between hose to tube using a clamp as shown in the illustration. - ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com