Hyundai Equus: Crankshaft Position Sensor (CKPS) Schematic Diagrams

Crankshaft Position Sensor (CKPS) Troubleshooting

Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveform at idle. ...

Crankshaft Position Sensor (CKPS) Repair procedures

Inspection 1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform� Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) ...

See also:

Rear LCD monitor Repair procedures
Removal     Take care not to scratch the crash pad and related parts. 1. Disconnect the negative (-) battery terminal. 2. Remove the LCD monitor bezel (A) from the front s ...

Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to “Intake And Exhaust System� in EM group). 3. Disconnect ...

Defogging logic
To reduce the possibility of fogging up the inside of the windshield, the air intake is controlled automatically according to certain conditions such as or position. To cancel or return the defog ...