>

Hyundai Equus: Crankshaft Position Sensor (CKPS) Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Crankshaft Position Sensor (CKPS) Specifications

Specification
Item
Specification
Coil Resistance (x)
774 ~ 946 [20°C (68°F)]
Air cap(mm)
0.5 ~ 1.5

    Crankshaft Position Sensor (CKPS) Description and Operation
    Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine ...

    Crankshaft Position Sensor (CKPS) Troubleshooting
    Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveform at idle. ...

    See also:

    Fuel Pressure Sensor (FPS) Description and Operation
    Description The fuel pressure sensor (FPS) is installed on top of the low pressure fuel pump and measures the pressure of the low pressure fuel line. Based on the current fuel pressure and the ...

    Heater Control Unit Repair procedures
    Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the cowl side trim. (Refer to Body - "Cowl Side Trim") 3. To remove the crash pad under cover [RH] (A), press both ...

    Components and Components Location
    Component Location 1. Slide motor2. Front Height motor3. Rear Height motor4. Recline motor5. Headrest motor6. Cushion extension motor7. Air lumbar support switch8. Air lumbar support pump9. Air l ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com