>

Hyundai Equus: Starter Specifications - Starting System - Engine Electrical System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Starter Specifications

Specification
Item
Specification
Rated voltage
12 V, 1.7 kW
The number of pinion teeth
13
Performance
[No-load, 11.5 V]
Ampere
Max. 85 A
Speed
Min. 2,550 rpm

    Starter Description and Operation
    Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and th ...

    Starter Components and Components Location
    Components 1. Front bracket2. Planet gear shaft assembly3. Lever4. Lever packing5. Magnet switch6. Through bolt7. Planet gear 8. Shield9. Armature assembly10. York assembly11. Brush holder assemb ...

    See also:

    Rear Lower Arm Repair procedures
    Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage ...

    Windshield Deicer Switch Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or plastic panel remover, remove the cluster fascia upper panel (A). 3. Using a screwdriver or plastic panel ...

    Transmission Oil Temperature Sensor Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com