>
Circuit Diagram |
Power Striker Repair procedures
Inspection
Power Trunk Lid Inspection With GDS
1.
Check the power trunk module input/output value by using the
GDS. If the operation of power trunk module is abnormal, replace power
trunk dri ...
Injector Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the injector terminals 1 and 2.
4.
Check that the resistance is within t ...
Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the
maintenance schedule. If the car is being driven in severe conditions, more frequent
oil and filter changes are requir ...