Hyundai Equus: Trunk Unlocking
Second generation VI (2009–2025) / Hyundai Equus 2009-2025 Owners Manual / Features of your vehicle / Keys / Trunk Unlocking
To unlock:
1. Carry the Smart Key.
2. Either press the trunk handle button or press the Trunk Unlock button on the
Smart Key for more than one second.
3. The hazard warning lights will blink two times.
Once the trunk is opened and then closed, the trunk will lock automatically.
✽ NOTICE
The power trunk (if equipped) can be operated when the engine is not running. However, the power trunk consumes large amounts of vehicle electric power. To prevent the battery from being discharged, do not operate consecutively (more than approximately 10 times).
Unlocking
To unlock:
1. Carry the Smart Key.
2. Either put your hand in the driver’s outside door handle or press the Door Unlock
button on the Smart Key.
3. The driver’s door will unlock. The haza ...
Panic Button
Press the Panic button (4) for more than one second. The horn sounds and hazard
warning lights flash for about 30 seconds.
To cancel the panic mode, press any button on the Smart Key. ...
See also:
LDWS operation
To operate the LDWS, pull the switch with the Engine Start/Stop Button in the
ON position. The indicator illuminates on the cluster. To cancel the LDWS, pull
the switch again.
LDWS indicator li ...
Output Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...
Line Pressure Control Solenoid Vale Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Categories
Hyundai Equus Manuals
