Hyundai Equus: Tire specification and pressure label
Second generation VI (2009–2025) / Hyundai Equus 2009-2025 Owners Manual / Specifications, Consumer information and Reporting safety defects / Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving.
The tire label located on the driver's side center pillar gives the tire pressures recommended for your car.
Vehicle certification label
The vehicle certification label attached on the driver’s side center pillar gives
the vehicle identification number (VIN). ...
Engine number
The engine number is stamped on the engine block as shown in the drawing. ...
See also:
Blind spot detection system (BSD) (If equipped)
The BSD (Blind spot detection) system uses a radar sensor to alert the driver
while driving.
It senses the rear side territory of the vehicle and provides information to
the driver.
(1) BSD (B ...
Line Pressure Control Solenoid Vale Specifications
Specifications
Line Pressure Control VFS
x Control type : Normal high type
Control Pressure kpa (kgf/cmx, psi)0~500.14 (0~5.1,0~72.54)Current value(mA)0~850 Internal resistance ...
Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
...
Categories
Hyundai Equus Manuals
