>
Items should be reset after the battery has been discharged or the battery has been disconnected.
ON/OFF Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Curtain Airbag (CAB) Module Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
2.
Remove the roof trim assembly.
(Refer to Body - "Roof Trim Assembly")
3.
Disconn ...
Input Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of Input speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...