>
1. With the glove box open, remove the stoppers on both sides to allow the glove box to hang freely on the hinges.
2. Remove the cylinder at the left of the glove box.
3. Remove the climate control air filter case pulling out both sides of the cover.
4. Replace the climate control air filter.
5. Reassemble in the reverse order of disassembly.
✽ NOTICE
When replacing the climate control air filter install it properly. Otherwise, the system may produce noise and the effectiveness of the filter may be reduced.
Exterior overview
1. Towing hook
2. Hood
3. Front windshield wiper blades
4. Sunroof
5. Outside rearview mirror
6. Door locks
7. Tires and wheels
8. Headlamps
9. Front fog light
1. Glass antenna and Defr ...
Master Cylinder Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the cover.
3.
Disconnect the ECM connector (A) and TCM connector (B). And then take the protect ...
Troubleshooting
Troubleshooting
•
The battery must be in good condition and fully charged for this troubleshooting.
...