>
The sensor detects distance to the vehicle ahead.
If the sensor is covered with dirt or other foreign matter, the vehicle to vehicle distance control may not operate correctly.
Always keep the sensor clean.
SCC (Smart cruise control) malfunction indicator
The warning message/ indicator illuminates when the vehicle to vehicle distance control system is not functioning normally.
Have the system checked by an authorized EQUUS dealer.
CAUTION
To convert to cruise control mode:
The driver may choose to only use the cruise control mode (speed control function) by doing as follows:
1.Turn the smart cruise control system on (the cruise indicator light will be
on but the system will not be activated).
2.Pull the distance to distance switch for more than 2 seconds.
3.Choose between "Smart cruise control(SCC) mode" and "Cruise control(CC) mode".
WARNING
When using the cruise control mode, you must manually access the distance to other vehicles as the system will not automatically brake to slow down for other vehicles.
Compressor Components and Components Location
Components
1. Dyer2. Motor3. Connected to tube4. Reverse valve connector5. Connector for motor driveing
...
Keep your garage dry
Don't park your car in a damp, poorly ventilated garage. This creates a favorable
environment for corrosion.
This is particularly true if you wash your car in the garage or drive it into
the ...
ESP OFF Switch Repair procedures
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable
2.
Remove the crash pad side cover.
3.
Remove the lower panel.
(Refer to Body - "Crash Pad")
4.
Re ...