>
Push the vehicle height control button to select the HIGH mode that makes the vehicle higher than the NORMAL mode and the indicator light on the vehicle height control button will illuminate. It is useful on a rough road.
✽ NOTICE
When you drive over 42 mph (70 km/h), you can not select the HIGH mode. If the vehicle speed exceeds 42 mph (70 km/h) while driving in the HIGH mode, the NORMAL mode will be selected automatically.
Push the vehicle height control button again to select the NORMAL mode that makes the vehicle height lower than the HIGH mode. The indicator light in the vehicle height control button will go off.
✽ NOTICE
Reprogramming a single HomeLink® button
To program a device to HomeLink® using a HomeLink® button previously trained,
follow these steps:
1. Press and hold the desired HomeLink® button. DO NOT release the button.
2. The indicator light ...
In-car Sensor Repair procedures
Inspection
1.
Turn the ignition switch ON.
2.
Blow warm air into the in-car sensor air inlet. Measure the sensor resistance between 1 and 3 terminals.
1. Sensor Ground 2. Motor (-)3. Incar ...
Pre-active Seat Belt (PSB) Schematic Diagrams
Circuit Diagram
...