The auto defogging sensor is installed on front window glass.
The sensor judges and sends signal if moisture occurs to blow out wind
for defogging. The air conditioner control module receives a signal from
the sensor and restrains moisture and eliminates defog by the intake
actuator, A/C, auto defogging actuator, blower motor rpm and mode
actuator.
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the console temperature control actuator connector.
3.
Verify that the console temperature control actuator operates
to the defr ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the auto defogging connector.
3.
Verify that the auto defogging actuator operates to the open
position when connecting 12V to ...
See also:
27 Brake Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Puddle lamp
When all the doors (and trunk) are locked and closed, the puddle lamp will come
on for about 15 seconds if any of the below is performed.
- When the door unlock button is pressed on the smart k ...
Front Seat Frame Assembly Components and Components Location
Component Location
1. Front seat back frame assembly2. Front seat cushion frame assembly
...