>
Hyundai Equus: Cool and Warm Box Repair procedures
| Replacement |
| 1. |
Remove the rear seat cushion and seat back assembly.
(Refer to Body - "Rear Seat Assembly") |
| 2. |
Remove the tower console assembly (A).
|
| 3. |
Remove the rear console armrest (A) by loosening the bolts.
|
| 4. |
Slightly remove the rear console upper cover (A).
|
| 5. |
Disconnect the connectors to entirely remove the rear console upper cover (A).
|
| 6. |
Remove the cool and warm box bezel cover (A).
|
| 7. |
Slightly remove the lower tray (A).
|
| 8. |
Disconnect the connectors to entirely remove the lower tray (A).
|
| 9. |
Remove the rear console assembly (A).
|
| 10. |
Remove the cool and warm box assembly (A) from the rear console assembly.
|
| 11. |
Remove the cool and warm box motor (A).
|
| 12. |
Install in the reverse order of removal. |
Cool and Warm Box Description and Operation
HeaterIf engine stalls while driving
1.Reduce your speed gradually, keeping a straight line. Move cautiously off the
road to a safe place.
2.Turn on your emergency flashers.
3.Try to start the engine again. If your vehicle will not s ...
Radiator Repair procedures
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, then install it to pressure tester.
2.
Apply a pressure of 93 ~ 123kPa (0.95 ~ 1.25kgf/cmx, 14 ~ ...
Rear combination light bulb replacement
(1) Stop, tail light and side marker
(2) Rear turn signal light
(3) Back-up light
Rear back-up light
If the light is not operating, have the vehicle checked by an authorized EQUUS
dealer.
Tur ...