The photo sensor is located at the wind shield glass.
The photo sensor contains a photovoltaic (sensitive to
sunlight) diode. The solar radiation received by its light receiving
portion, generates an electromotive force in proportion to the amount of
radiation received which is transferred to the automatic temperature
control module so that the solar radiation compensation will be
performed.
Inspection
1.
Turn the ignition switch ON.
2.
Blow warm air into the in-car sensor air inlet. Measure the sensor resistance between 1 and 3 terminals.
1. Sensor Ground 2. Motor (-)3. Incar ...
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will ri ...
See also:
Rear Seat Cushion Cover Components and Components Location
Component Location
1. Rear seat cushion cover [LH]2. Rear seat cushion cover [RH]
...
Heated Steering wheel Repair procedures
Inspection
1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance(Black / Yellow, Black) - 10.0 kx ± 10% (25°C)
B.
Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 x ± 10%
2 ...
Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Run the engine at idle, and put a finger on t ...