Hyundai Equus: Blind Spot Detection Indicator Components and Components Location

Blind Spot Detection Switch Repair procedures

Removal 1. Disconnect the negative (-) battery. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower panel and then push the bl ...

Blind Spot Detection Indicator Repair procedures

Removal Blind Spot Detection Warnig Indicator 1. Disconnect the negative (-) battery terminal. 2. Remove the mirro (A). Installation Blind Spot Detection Warnig Indicator 1. Install the ...

See also:

Front Hub / Knuckle / Tone Wheel Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub .     Be ca ...

Filter replacement
It must be replaced when necessary, and should not be washed. You can clean the filter when inspecting the air cleaner element. Clean the filter by using compressed air. Main air cleaner 1. ...

Master Cylinder Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the cover. 3. Disconnect the ECM connector (A) and TCM connector (B). And then take the protect ...