>
Hyundai Equus Manuals

Hyundai Equus: Multi Function Switch(MFSW) Description and Operation - Body Network System - Body Electrical System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Multi Function Switch(MFSW) Description and Operation

Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Body Network System / Multi Function Switch(MFSW) Description and Operation

Description
1.
Multi Function Switch (MFSW)

(1)
Main features
Item
Description
Installation location
 Multi Function Switch (right)
Component configuration
1.
ECU
2.
CAN Communication IC: Body Electrical System
3.
MFS (Light & Wiper Switch)
Main features
1.
The wiper and washer switch signals are transmitted via CAN Line
2.
Lamp (Tail Lamp, Head Lamp, Fog Lamp, Auto Light, Turn Signal Lamp) Switch signals are transmitted via CAN
3.
Wiper LOW Backup Line - Wiper Control Module
(for failsafe function in case of communication line failure)
4.
Washer relay operation.
5.
CAN communication with embedded IC (BCM CAN communication module)

(2)
For detail information about circuit diagram, refer to the multifunction switch.
(Refer to "Multifunction Switch")
    Assist Power Seat Module(APSM) Description and Operation
    Description 1. Assist Power Seat Module (APSM) (1) Main features ItemDescriptionInstallation location Lower section of the assist side seatComponent configuration 1. Embedded with CAN Commu ...

    Steering Wheel Remote Controller (SWRC) Description and Operation
    Description 1. Steering Wheel Remote Controller (SWRC) (1) Main features ItemDescriptionInstallation location Located on the driver side handle (CAN Module is embedded in the audio switch on ...

    See also:

    ESP Control Unit Components and Components Location
    Components [Standard] 1. Front-right tube2. Rear-left tube3. Rear-right tube4. Front-left tube5. MC26. MC17. ESP control module connector8. ESP control module(HECU)9. ESP HECU bracket [Premiu ...

    Canister Repair procedures
    Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the service cover (A). 3. Disconnect the fuel tank pressure sensor connector (A) and the ...

    Power Window Switch Repair procedures
    Inspection Driver Power Window Switch 1. When checking the driver power window switch, select a vehicle type and "IPM" menu. 2. Select "DDM (Driver Door Module)". 3. Select option "Input/ ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com