Hyundai Equus: Lighting System
- Specifications
- Components and Components Location
- Head Lamps Components and Components Location
- Head Lamps Description and Operation
- Head Lamps Repair procedures
- Rear combination lamp Repair procedures
- Room Lamp Repair procedures
- Overhead Console Lamp Repair procedures
- Hazard Lamp Switch Repair procedures
- Rheostat Repair procedures
- Front Fog Lamps Repair procedures
- High Mounted stop lamp Repair procedures
- Troubleshooting
Sunroof Motor Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console then remove the sun roof motor
mounting screws (3EA). And then remove the sunroof motor (A) after ...
Specifications
Specification
ItemsBulb Wattage (W)FrontHead lamp (High)55Head lamp (Low)35 (HID) or LEDFront turn signal lampLEDFront fog lampLEDPosition lampLEDDoor mirrorLEDRearRear stop/tail lamp (Outside) L ...
See also:
Erasing HomeLink® buttons
Individual buttons cannot be erased. However, to erase all three programmed buttons:
1. Press and hold the two outer HomeLink® buttons until the indicator light begins
to flash-after 20 seconds.
...
Smart Key Diagnostic Repair procedures
Inspection
Self Diagnosis With GDS
Smart key system defects can be quickly diagnosed with the
GDS. GDS operates actuator quickly to monitor, input/output value and
self diagnosis.
The followi ...
Presure Switch Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com