Hyundai Equus: Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body Electrical System / Electro chromic Inside Rear View Mirror / Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body Electrical System / Electro chromic Inside Rear View Mirror / Description and Operation
| Description |
The ECM (Electro Chromic inside rear view Mirror) is for
dimming the reflecting light from a vehicle behind at night, in order
the user not to be dazzled by the light. The front looking sensor
detects brightness of the surroundings, while the rearward looking
sensor the strength of the reflecting light so that adjusts the
reflexibility of the mirror in the range of 10~70%. But, when the
reverse gear is engaged, it stops functioning.
| 1. |
The front looking sensor sees if the brightness of the surroundings is low enough for the mirror to operate its function. |
| 2. |
The rearward looking sensor detects glaring of the reflecting light from a vehicle behind. |
| 3. |
The ECM is darkened to the level as determined by the
rearward looking sensor. When the glaring is no longer detected, the
mirror stops functioning.
|
| Automatic-dimming Function |
To protect your vision during nighttime driving, your mirror
will automatically dim upon detecting glare from the vehicles traveling
behind you. The auto-dimming function can be controlled by the Dimming
ON/OFF Button :
| 1. |
Pressing and holding the Feature Control button for more than
3 but less than 6 seconds turns the auto-dimming function OFF which is
indicated by the green Status Indicator LED turning off. |
| 2. |
Pressing and holding the Feature Control button again for
more than 3 but less than 6 seconds turns the auto-dimming function ON
which is indicated by the green Status Indicator LED turning on.
|
Repair procedures
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cover the front looking sensor to stop functioning.
...
See also:
Assist Handle Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
AUX jack Repair procedures
Removal
1.
Remove the floor console upper tray.
(Refer to Body - "Floor Console Assembly")
2.
Remove the center fascia lower tray.
(Refer to Body - "Center fascia pannel")
3.
Remove the ...
LCD Display Control
The LCD display modes can be changed by using the control buttons on the steering
wheel.
1) button : Changing LCD modes
(right to left), or returning to previous position
(2) but ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com