>
Inspection |
1. |
Remove the front door quadrant inner cover. Take care not to damage fixing clips.
(Refer to Body - "Front Door") |
2. |
Disconnect the power door mirror connector from the harness. |
3. |
Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.
Memory Mirror
Mirror Heater
Puddle Lamp
Turn Signal Lamp
BSD Warning Lamp
ECM Function
Folding Mirror |
Compressor Components and Components Location
Components
1. Center Bolt2. Hub Bolt3. Hub Assembly4. Snap Ring5. Pulley6. Compressor Assembly
...
Rear Door Window Glass Components and Components Location
Component Location
1. Rear door window glass
...
Puddle lamp
When all the doors (and trunk) are locked and closed, the puddle lamp will come
on for about 15 seconds if any of the below is performed.
- When the door unlock button is pressed on the smart k ...