>

Hyundai Equus: Lumbar Support Unit Repair procedures - Seat Electrical - Body Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Lumbar Support Unit Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear seat back.
(Refer to Body - "Rear Seat Back Cover")
3.
Remove the bladder & ECU/ valve assembly (A) after loosening the mounting bolts from the rear seat back.

Installation
1.
Install the bladder & ECU/ valve assembly.
2.
Remove the rear seat back.
   
-
Make sure that the connectors are plugged in properly.
-
Check the rear lumbar support system.
    Lumbar Support Unit Components and Components Location
    Components Bladder & Massage ECU ...

    Fuel Filler Door
    ...

    See also:

    Seat belt restraint system
    WARNING For maximum restraint system protection, the seat belts must always be used whenever the car is moving. Seat belts are most effective when seatbacks are in the upright position. Chi ...

    Wipers & Washers
    A : Wiper speed control -MIST – Single wipe -OFF – Off -AUTO – AUTO control wipe -LO – Low wiper speed -HI – High wiper speed B : Auto control wipe time adjustment C :Wash with brief wipes ...

    Front Air Strut Assembly Schematic Diagrams
    Circuit Diagram 1. Front air strut connector 2. Front air terminal function TerminalFunction1Variable damper (-)2Variable damper (+) 3. Circuit diagram ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com