Comparing with the seat heat function by the existing thermic
rays, Climate Control Seat functions the heating,cooling, dehumidifying
by using TED.
It inhales the indoor air through the blower installed at the
seat cushion lower part, and supplies the air into the seat cushion and
the seat back through the duct.
It heats or cools the air supplied from TED set up at the tip of the duct.
It sends a slight heated or cooled air throughout the seat surface through the air channel set up at seat cushion and seat back.
1. |
TED is the exchange system with heat and electricity. It can
be used anywhere in case of accomplishing heating and cooling at once,
if necessary generation by using heating sources. |
2. |
It is the next generation cooling system which can substitudes for the compressure cooling system. |
|
It can simply generate heating and cooling at once through
the electric poles conversion, and also keep a steady temperature
through cooling and heating an object between -30°C and +150°C.
Removal
Front Seat - Climate control system Seat Blower
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front seat.
(Refer to Body - "Front Seat Assembly")
3.
Remove the f ...
See also:
Driving off-road
Drive carefully off-road because your vehicle may be damaged by rocks or roots
of trees. Become familiar with the off-road conditions where you are going to drive
before you begin driving. ...
Components and Components Location
Components Location
1. Rear shock absorber2. Rear upper arm3. Rear trailing arm4. Rear Assist arm5. Rear sub frame6. Rear disk7. Rear front upper arm
...
Rear Door Trim Components and Components Location
Component Location
1. Rear door trim
...