>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the door trim (A) after loosening mounting screws.
(Refer to Body - "Front Door Trim") |
3. |
Remove the memory power seat control switch (A) after loosening connector and screws (2EA) from the door trim. |
Installation |
1. |
Install the memory power seat control switch after connecting the switch connector. |
2. |
Install the driver door trim. |
3. |
Install the negative (-) battery terminal. |
Head Up Display Unit Schematic Diagrams
Circuit Diagram
...
Rearview camera (If equipped)
The rearview camera will activate when the back-up light is ON with the ignition
switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind ...
Front Pillar Trim Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protec ...