Hyundai Equus: Memory Power Seat Switch Components and Components Location

Memory Power Seat Unit (IMS & PSM) Repair procedures

Removal 1. Remove the negative(-) battery terminal. 2. Remove the seats in the car. (Refer to Body - "Front Seat Assembly") 3. Remove the IMS & PSM module (A) after loosening 4 screws ...

Memory Power Seat Switch Schematic Diagrams

Circuit Diagram (Power Seat Control Switch) ...

See also:

Sunroof Glass Repair procedures
Replacement     • Put on glove to protect your hands. 1. Remove both sides of the decoration cover (A). 2. Loosen the mounting screws, then remove the glass (A) by ...

DRIVE mode / SNOW mode
The drive mode may be selected according to the driver’s preference or road condition. The system initializes to the NORMAL mode when the Engine Start/Stop Button is turned off and on. It is ...

Presure Switch Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...