>
Removal |
1. |
Remove the floor console upper tray.
(Refer to Body - "Floor Console Assembly") |
2. |
Remove the center fascia lower tray.
(Refer to Body - "Center fascia pannel") |
3. |
Remove the multimedia jcak (A) after releasing the fixed hooks (B). |
Installation |
1. |
Connect the multimedia jack connector. |
2. |
Install the multimedia jack. |
3. |
Install the center facia lower tray.
|
27 Brake Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Fuel Pump Motor Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
"Release the residual pressure in fuel line.
(Refer to Fuel Delivery System -""Release Residual Pres ...
Steering Column Shroud Panel Components and Components Location
Component Location
1. Steering column shroud lower panel2. Steering column shroud upper panel
...