Hyundai Equus: Center Fascia Panel Components and Components Location
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Body (Interior and Exterior) / Crash Pad / Center Fascia Panel Components and Components Location
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Body (Interior and Exterior) / Crash Pad / Center Fascia Panel Components and Components Location
| Component Location |
| 1. Center fascia upper panel | 2. Center fascia lower panel |
Cluster Fascia Panel Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply p ...
Center Fascia Panel Repair procedures
Replacement
[Center Fascia Upper Panel]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with ...
See also:
Canister Close Valve (CCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specific ...
VSM OFF Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
3.
Remove the TORX screws to rem ...
CVVT Oil Control Valve (OCV) Specifications
Specification
ItemSpecificationCoil Resistance (x)6.9 ~ 7.9 [20°C(68°F)]
...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com