Hyundai Equus: Emergency Fastening Device (EFD) Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Restraint / Seat Belt Pretensioner / Emergency Fastening Device (EFD) Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Restraint / Seat Belt Pretensioner / Emergency Fastening Device (EFD) Description and Operation
| Description |
The Emergency Fastening Device (EFD) operates at the same
time with the Seat Belt Pretensioner when it satisifies the deployment
condition after a collision. It is an auxiliary equipment to prevent a
driver and passenger from breaking away by pulling the seat belt toward
the anchor side after a collision. It is located near the anchor on the
driver and passenger seat and is supported by two cables.
Never measure the resistance of the anchor pretensioner
directly, the current of the measuring device may cause unexpected
airbag deploy. |
Seat Belt Pretensioner (BPT) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the safety belt (A) by turning it in the direction of arrow using a flat ...
See also:
Climate Seat Unit Schematic Diagrams
Circuit Diagram
...
Lane departure warning system (LDWS) (If equipped)
This system detects the lane with the sensor at the front windshield and warns
you when your vehicle leaves the lane.
WARNING
The LDWS does not make the vehicle change lanes. It is the driver ...
Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com