>

Hyundai Equus: Emergency braking - Brake system - Driving your vehicle - Hyundai Equus 2009-2020 Owners ManualHyundai Equus: Emergency braking

If there is a problem with the foot brake while driving, emergency braking is possible by pulling and holding the EPB switch.

However, braking distance will be longer than normal condition.

WARNING

Do not operate the parking brake while the vehicle is moving except in an emergency situation. It could damage the brake system and lead to an accident.

✽ NOTICE

During emergency braking by the EPB, the parking brake warning light will illuminate to indicate that the system is operating.

CAUTION

If there is a noise or burning smell after using the emergency braking, have your vehicle checked by an authorized EQUUS dealer as soon as possible.

When the EPB (electric parking brake) is not released

If the EPB does not release normally, we recommend that you contact an authorized EQUUS dealer by loading the vehicle on a flatbed tow truck and have the system checked.

    Electric parking brake (EPB)
    Applying the parking brake To engage the parking brake, first apply the brake pedal and then pull the EPB switch. Make sure that the brake warning light comes on. WARNING Do not operate the p ...

    Auto hold
    The AUTO HOLD feature keeps the brakes applied after the vehicle comes to a complete stop when the shift lever is in D, R, or N. The brakes release when throttle is applied. Set up 1.Pre ...

    See also:

    Components and Components Location
    Components 1. Front seat headrest2. Front seat headrest guide3. Front seat back cover4. Front seat cushion cover5. Front seat cushion pad6. Front seat back cushion frame7. Front seat mounting cov ...

    This device complies with Part 15 of the FCC Rules.
    Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may c ...

    Manifold Absolute Pressure Sensor (MAPS) Repair procedures
    Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Tur ...

    Categories

    Hyundai Equus Manuals

    © 2011-2020 Copyright www.heqmanual.com