See also:
Filler-Neck Assembly Repair procedures
Removal
1.
Disconnect the fuel filler hose (A) and the leveling hose (B).
2.
Disconnect the vapor hose quick-connector (A) after removing the trunk luggage trim.
3.
Remove the rear-LH whee ...
Output Speed Sensor Specifications
Specifications
x Type: Hall effect sensor
x Specifications
Operation condition (°C)°F((-)40~150)) -40~302Air gap(mm)in.1.3(0.0512)Output voltageHigh1.4Low0.7
...
Cool and Warm Box Repair procedures
Replacement
1.
Remove the rear seat cushion and seat back assembly.
(Refer to Body - "Rear Seat Assembly")
2.
Remove the tower console assembly (A).
3.
Remove the rear console armrest (A ...